INTRON COLOR PRESS
| Our printing technology is based on toner be havior at high temperatures. To print square edged contours and fine lettering of standard materials need you a very high printing pressure of 12 kp/cm³. This ensures that no materials are damaged and deformed during printing (plastics, films, acryl, lacquer layers). |
 |
| The hydraulic presses developed and constructed byINTRON Jena GmbH it self are characterized by a very high level of technical development and lead the way in cost/performance ratio. They are constantly tailoredto reflect the latest state of printing technology and engineering. |
 |
Technology
- Short heating-up times and less heat loss
- Microprocessor-based control for printing temperature and time
- Increased reliability through plugin modules
- Adjustable printing tables DIN A4 or DIN A3
- Maintenance-free!
- Automatic setting of printing pressure, depending on print size ofthe hydraulic machines
- Temperature range also adjustable over 200°C, also suited for
ink sublimation
- Print of long materials, by simply removing the front and rear panels
- Printing on commercially available materials without
prior special coating.
Technical Data:
|
PV 3.2 |
PV 2.2 |
|
|
|
| Printing plate |
450 x 330 mm |
620 x 450 mm |
| Heating plate |
460 x 340 mm |
630 X 460 mm |
| Weight |
150 kg |
170 kg |
| Print counter |
Day/total print counter |
| Control |
Microprocessor-based-control |
| Measurements |
780 x 530 x 680 mm |
| Variation |
Stepless/digital |
| Temperature range |
0°C - 200°C |
| Pressure |
11,5 kp/cm² |
| Connected load |
230 V/50 Hz |
| Drive |
hydraulic |
| Autom. error indication |
yes |
| Model |
Table top unit |
| Acceptance width |
640 mm |
| Acceptance width |
16 As |
|
As a result of our modular design, our systems can be quickly adjusted from A3 format to A2 without incurring significant costs. The color transfer presses of INTRON JENA GmbH are completely certified according to all guidelines proof of very high quality and technology.
Specification sheet
|
